Directions for Artificial Lichen Application

Apply a small thin coat of adhesive glue to the bottom of the lichen with a smooth palate knife, small paintbrush, or small spatula. Attach the lichen to your surface area by applying soft pressure with hand/fingers. If there is any excess glue residue, remove it by taking a small paintbrush with a small amount of water and slowly clean away excess glue from around the edges.

Wait approximately 1/2 hour and reapply soft pressure to lichen. If necessary, wait an additional 1/2 hour and reapply pressure or until lichen is permanently in place.

Works best at, or above 70 degrees as this helps the material become more pliable. Do not apply direct heat to the lichen as this will cause irreversible damage. Ensure that the surface area you are fastening the lichen to is clean and dry.

Any questions, please contact Dan Lee at Artist's Touch 1-928-632-8091

About the product: Artist's Touch is made of formulated material that is water resistant and durable in strength and rigidity, along with the capability to be formed to almost any surface area. The lichen itself is of museum quality and will enhance your artwork to show a very natural setting that will hold up to close examination or scrutiny.